This instruction serves as a guide for connecting Bitget exchange to the ATAS platform. If you do not have an account yet, you can register on the exchange at the following link: https://www.bitget.com
To connect Bitget account in ATAS, there should be no open pending orders on the exchange
To trade via ATAS, the order type “No Hedging” must be activated. Hedging mode is not available in ATAS. You can change the order mode on the exchange in the chart settings
1. To connect an account in ATAS it is necessary to create an API key. You can do it in your personal cabinet at the following link: https://www.bitget.com/ru/account/newapi
2. In the settings, activate the necessary tools that will be available through API connection, at the end specify the secret phrase that is required for API connection
3. Connect the account using the generated keys in ATAS. To do this, in the main window of the platform click on Connections - Add - Bitget and click Next
4. Setting up the connection in ATAS
API Key, API Secret- keys generated on the site.Secret phrase - set by the user when creating API connection on the site.
Demo account - must be activated to connect a demo account.
Connection name - displayed name of the connection in the connection list.
Portfolio name - the name for the portfolio to distinguish portfolios from several simultaneous connections (it is possible not to specify).
Stop orders update frequency (in minutes).
Portfolio update frequency (in minutes).
After setting up the connection, it will appear as a separate line in the list of connections.
You can read about the settings of this window here: Connection Settings Window
1. Add - add a new connection
2. Type - connection source
3. Name - connection name which you can set yourself
4. State - connection status
5. Is market data - option to select a quote provider (this connection will be used as a quote provider)
6. Auto connect - if you want the connection to automatically occur when the platform is launched, you need to enable this option
7. Connection settings button
8. Remove connection from the list button
9. Connect/Disconnect - connect/disconnect the connector
This instruction serves as a guide for connecting Bitget exchange to the ATAS platform. If you do not have an account yet, you can register on the exchange at the following link: https://www.bitget.com
To connect Bitget account in ATAS, there should be no open pending orders on the exchange
To trade via ATAS, the order type “No Hedging” must be activated. Hedging mode is not available in ATAS. You can change the order mode on the exchange in the chart settings
1. To connect an account in ATAS it is necessary to create an API key. You can do it in your personal cabinet at the following link: https://www.bitget.com/ru/account/newapi
2. In the settings, activate the necessary tools that will be available through API connection, at the end specify the secret phrase that is required for API connection
3. Connect the account using the generated keys in ATAS. To do this, in the main window of the platform click on Connections - Add - Bitget and click Next
4. Setting up the connection in ATAS
Secret phrase - set by the user when creating API connection on the site.
Demo account - must be activated to connect a demo account.
Connection name - displayed name of the connection in the connection list.
Portfolio name - the name for the portfolio to distinguish portfolios from several simultaneous connections (it is possible not to specify).
Stop orders update frequency (in minutes).
Portfolio update frequency (in minutes).
After setting up the connection, it will appear as a separate line in the list of connections.
You can read about the settings of this window here: Connection Settings Window
1. Add - add a new connection
2. Type - connection source
3. Name - connection name which you can set yourself
4. State - connection status
5. Is market data - option to select a quote provider (this connection will be used as a quote provider)
6. Auto connect - if you want the connection to automatically occur when the platform is launched, you need to enable this option
7. Connection settings button
8. Remove connection from the list button
9. Connect/Disconnect - connect/disconnect the connector
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article